Older Parts!

Archive of for sale section

Moderator: Moderators

User avatar
Devospeed
Member
Posts: 1228
Joined: Thu Jan 11, 2007 1:17 pm
Location: Pittsburgh
Been thanked: 1 time
Contact:

Older Parts!

Post by Devospeed »

I would just like to make an announcement that I purchased a box full of older parts. Included in the box are keys, door lock cylinders, bulbs, buttons, transformers, and some other stuff. So if anybody is looking for a certain part drop me a PM! I even have a red beacon light that looks new!
User avatar
Chris
Site Admin
Posts: 3759
Joined: Thu Jan 26, 2006 10:15 am
Location: Massachusettes
Has thanked: 12 times
Been thanked: 42 times
Contact:
United States of America

Post by Chris »

Devon,

Do you have any stop buttons in your older box of tricks? I am looking for a stop button to an older machine. enclosed micro switch with two wires going to a white connector. The button top is removable so color it not an issue.
I will take a picture tonight to show you what I am looking for.
These are my opinions and just because I am the admin you don't have to agree with me
suicidec

Post by suicidec »

i need a cylinder and key like this, as my pachislo never came with a front door key
User avatar
Chris
Site Admin
Posts: 3759
Joined: Thu Jan 26, 2006 10:15 am
Location: Massachusettes
Has thanked: 12 times
Been thanked: 42 times
Contact:
United States of America

Post by Chris »

Here is the picture:

Image
These are my opinions and just because I am the admin you don't have to agree with me
User avatar
Devospeed
Member
Posts: 1228
Joined: Thu Jan 11, 2007 1:17 pm
Location: Pittsburgh
Been thanked: 1 time
Contact:

Post by Devospeed »

I will take some pictures of everything I have tonight! I'll do my best to help everybody that needs a part!
User avatar
Chris
Site Admin
Posts: 3759
Joined: Thu Jan 26, 2006 10:15 am
Location: Massachusettes
Has thanked: 12 times
Been thanked: 42 times
Contact:
United States of America

Post by Chris »

Should I take that as a no, I do not have that part?
These are my opinions and just because I am the admin you don't have to agree with me
User avatar
Devospeed
Member
Posts: 1228
Joined: Thu Jan 11, 2007 1:17 pm
Location: Pittsburgh
Been thanked: 1 time
Contact:

Post by Devospeed »

Chris wrote:Should I take that as a no, I do not have that part?
Sorry Chris, I do not have that part! But I will be on the lookout for it! :D

Suicidec, I may have your cylinder and key. You will probably need to take it off the piece of metal so I can compare it.
suicidec

Post by suicidec »

Devospeed wrote: Suicidec, I may have your cylinder and key. You will probably need to take it off the piece of metal so I can compare it.
i have 2 more pics let me know if you need more

http://homepage.ntlworld.com/andyconroy1/DSCF2564.JPG
http://homepage.ntlworld.com/andyconroy1/DSCF2565.JPG
User avatar
Chris
Site Admin
Posts: 3759
Joined: Thu Jan 26, 2006 10:15 am
Location: Massachusettes
Has thanked: 12 times
Been thanked: 42 times
Contact:
United States of America

Post by Chris »

It looks like one of the cylinders that are attached to the locking mechanism.
These are my opinions and just because I am the admin you don't have to agree with me
suicidec

Post by suicidec »

any luck devospeed?
User avatar
Devospeed
Member
Posts: 1228
Joined: Thu Jan 11, 2007 1:17 pm
Location: Pittsburgh
Been thanked: 1 time
Contact:

Post by Devospeed »

I finally got around to taking some pictures of the parts. I would like to thank Outdooreth and Ichi for helping me out with the Hihouden LED reel board. I found out the board was not the problem. I had a wire loose from one of the connectors coming from the reel board. So I just plugged it back into the connector and it works now. So I now added the LED reel board to the parts.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
User avatar
Devospeed
Member
Posts: 1228
Joined: Thu Jan 11, 2007 1:17 pm
Location: Pittsburgh
Been thanked: 1 time
Contact:

Post by Devospeed »

suicidec wrote:any luck devospeed?
Suicidec,

How long is the cylinder? And could you take a close up picture of the back. I think I have one that is close.
User avatar
Devospeed
Member
Posts: 1228
Joined: Thu Jan 11, 2007 1:17 pm
Location: Pittsburgh
Been thanked: 1 time
Contact:

Post by Devospeed »

I do have more parts to take pictures of. Most of them are cabinet parts and different size bulbs. So I will be taking pictures of those when I get off my lazy butt again!
User avatar
Chris
Site Admin
Posts: 3759
Joined: Thu Jan 26, 2006 10:15 am
Location: Massachusettes
Has thanked: 12 times
Been thanked: 42 times
Contact:
United States of America

Post by Chris »

that is a good selection of locks & keys. Do any of them match up?
These are my opinions and just because I am the admin you don't have to agree with me
User avatar
Devospeed
Member
Posts: 1228
Joined: Thu Jan 11, 2007 1:17 pm
Location: Pittsburgh
Been thanked: 1 time
Contact:

Post by Devospeed »

Chris wrote:that is a good selection of locks & keys. Do any of them match up?
Thats the tough part, only one cylinder has a a label with Taco Slot on it. There are some keys that have company names and numbers on them. I will have too sit down someday and go through them all.
suicidec

Post by suicidec »

Devospeed wrote:
suicidec wrote:any luck devospeed?
Suicidec,

How long is the cylinder? And could you take a close up picture of the back. I think I have one that is close.
here you go bud, the cylinder is about 2 inches long (5cm)

http://homepage.ntlworld.com/andyconroy1/pach/
User avatar
teqkng
Member
Posts: 412
Joined: Wed Jun 18, 2008 8:42 am
Location: plantation, florida
Has thanked: 5 times
Been thanked: 4 times
Contact:
United States of America

Post by teqkng »

Chris, that switch is for one of the older picagorus or new pulsars (or similar chassis) I have a rental fleet full of them and have the part. (that particular unit also works as the credit/or no credit button) my email is on the server I will send one. I have it in my toolbox now.
ask and ye shall learn
User avatar
Chris
Site Admin
Posts: 3759
Joined: Thu Jan 26, 2006 10:15 am
Location: Massachusettes
Has thanked: 12 times
Been thanked: 42 times
Contact:
United States of America

Post by Chris »

Thanks but I already got one from Stealth. I was fixing a machine for someone and I didn't want to make them wait. I appreciate the offer though.

Thanks,

Chris
These are my opinions and just because I am the admin you don't have to agree with me
kimcfadd
Member
Posts: 65
Joined: Sun Sep 09, 2007 1:03 am
United States of America

Post by kimcfadd »

Devon,

I might be interested in having an extra spin knob.

Kirt
cmdrdave
Member
Posts: 1
Joined: Thu Feb 05, 2009 4:02 pm
United States of America

Post by cmdrdave »

need lock cyl and key for one machine, and light bulbs including bellyt bulbs.


what you got left??
Post Reply