Need a Bellco transformer 24v 5A

If you have a machine that is dead or missing parts and want to sell off the parts. List the machine here

Moderator: Moderators

Post Reply
Asianbingo
Member
Posts: 6
Joined: Sat Apr 06, 2013 1:21 am

Need a Bellco transformer 24v 5A

Post by Asianbingo »

Have a bellco Bingo machine, worked excellent until a power surge fried my transformer...using a dell laptop adapter that's 19.5v 6.7 amp output and machine works, but light is dim, reel lights don't work except very faint during bonus runs...and sometimes, reels don't start right away.

I guess I need this....?Image

Thanks in advance for any help.
User avatar
Tomscott
Member
Posts: 529
Joined: Tue Feb 14, 2012 3:46 am
Location: middlesbrough
Has thanked: 2 times
Been thanked: 3 times

Post by Tomscott »

Send Chris a pm he may have some for sale.
User avatar
pjtnascar
Member
Posts: 285
Joined: Sun Oct 31, 2010 12:18 pm
Location: Sussex County, NJ
United States of America

Post by pjtnascar »

I always keep my machines uplugged unless I'm playing them. They are also plugged into a surge protector.
User avatar
Tomscott
Member
Posts: 529
Joined: Tue Feb 14, 2012 3:46 am
Location: middlesbrough
Has thanked: 2 times
Been thanked: 3 times

Post by Tomscott »

http://www.pachiparts.com/ViewCat.php?C ... _province=
There is some transformers for sale on pachiparts.com click on the link above.
wallytrek
Member
Posts: 89
Joined: Tue Jan 03, 2012 6:52 pm
Been thanked: 1 time

Re: Need a Bellco transformer 24v 5A

Post by wallytrek »

About power surge problems. I have 10 slots and what I did was obtain a wireless remote that turns them all on and off. This will save your slots and keep you from plugging them in and out. Just a suggestion.

Wallytrek
User avatar
Arraking
Gone, but not forgotten
Posts: 3862
Joined: Tue Jan 06, 2009 9:07 pm
Location: New Hampshire
Has thanked: 25 times
Been thanked: 6 times
United States of America

Re: Need a Bellco transformer 24v 5A

Post by Arraking »

I have never known a transformer to "blow" due to a voltage surge... It much have been one heck of a surge! Like a very close lighting strike?

I would try looking at e blay, the best price's can be had there. Most are 6 amp @24 volts for around $15.
Are you sure it's the transformer??
Look in my repair guide on how to use a VOM, it's easy once you take the step to try it. And my repair guide will give you step by step instructions on how to use one.

And have you checked the power unit fuse? That could have kicked the bucket after years of poweing up.
It could be the transformer has one on it, it looks like a switch on one end there... It may even just be the switch.
Simple to by pass, that is if you know how to solder.
User avatar
teqkng
Member
Posts: 412
Joined: Wed Jun 18, 2008 8:42 am
Location: plantation, florida
Has thanked: 5 times
Been thanked: 4 times
Contact:
United States of America

Re: Need a Bellco transformer 24v 5A

Post by teqkng »

I recommend getting the 6 or 7 amp Power supply... most of the conversions I have seen use a 3 or 4 amp that gets to warm or eventually burns if left on to long.

The 6 and up to 8 amp units do not generate as much of a hum and actually stay a lot cooler.
ask and ye shall learn
User avatar
Wayne-O
Member
Posts: 2877
Joined: Sun Aug 28, 2011 6:48 pm
Location: Lebanon, Indiana
Has thanked: 35 times
Been thanked: 53 times
United States of America

Re: Need a Bellco transformer 24v 5A

Post by Wayne-O »

I'm thinking after almost a year, he's probably already gotten one. :dontknow:
ImageThe Pachislo RepairGuide
Check it out for information on these machines.
User avatar
Arraking
Gone, but not forgotten
Posts: 3862
Joined: Tue Jan 06, 2009 9:07 pm
Location: New Hampshire
Has thanked: 25 times
Been thanked: 6 times
United States of America

Re: Need a Bellco transformer 24v 5A

Post by Arraking »

Now how come after all this time this post showed up as a recent post? Thanks Wayne, I didn't realize this post was so old :|
User avatar
Chris
Site Admin
Posts: 3759
Joined: Thu Jan 26, 2006 10:15 am
Location: Massachusettes
Has thanked: 12 times
Been thanked: 42 times
Contact:
United States of America

Re: Need a Bellco transformer 24v 5A

Post by Chris »

It showed up as a recent post because Wallytrek replied to it on 14 Mar 2014 10:16 am
These are my opinions and just because I am the admin you don't have to agree with me
User avatar
teqkng
Member
Posts: 412
Joined: Wed Jun 18, 2008 8:42 am
Location: plantation, florida
Has thanked: 5 times
Been thanked: 4 times
Contact:
United States of America

Re: Need a Bellco transformer 24v 5A

Post by teqkng »

The thread does bring up a good topic for review...

I think recommending a 6 or 7 amp Power supply for any unit after 2005 OR on may unit with Video options is a good Idea.

I dont like using the 4 amp units anymore because they generate to much heat and tend to start humming after a short time.

I have had much greater success with units specified at 5 to 7 amps...

I guess that is just my 2 Tokens input...
ask and ye shall learn
User avatar
Arraking
Gone, but not forgotten
Posts: 3862
Joined: Tue Jan 06, 2009 9:07 pm
Location: New Hampshire
Has thanked: 25 times
Been thanked: 6 times
United States of America

Re: Need a Bellco transformer 24v 5A

Post by Arraking »

Oh good advise for sure. I have not owned a game that had that small a trasnformer in it, so I was not aware that some had put such low amperage is these. I guess that would explain why years ago when I was looking to buy my first game that some were complaning of problems with the game they purchaed, or that some had go so HOTthat fires had started??
That would be a definate bummer!

But yea, the higher the amp, the better off you are for sure. Things will run nice and the transformer runs much cooler to.
I bought all my games from Stealth, several from when Milt owned it, he stood behind every part no questions asked. He even "bragged" about how he used 6 amp transformers in all his machines. I never had any problems.
User avatar
teqkng
Member
Posts: 412
Joined: Wed Jun 18, 2008 8:42 am
Location: plantation, florida
Has thanked: 5 times
Been thanked: 4 times
Contact:
United States of America

Re: Need a Bellco transformer 24v 5A

Post by teqkng »

Yup,

Milt and the Importer I worked with co Shipped from Japan 3 and 4 containers at a time or more. He paid from what I gather 15% more to use the better Power supply we used 4A units but I have seen as low as 3A and 2.5A used.
ask and ye shall learn
Post Reply