POPEYE
Posted: Thu Jun 18, 2009 12:58 pm
Really cool machine with a full screen LCD action, Great sound with added volume controls needed. A 24 volt transformer installed. If your reels sound too loud turning it may not be the motors, Remove reels from motors (one small Allan set screw) use a flashlight in a dark area and put the flashlight against the flat center of the reel. If you see any hairline cracks in black plastic use ca glue over each crack. These cracks are very hard to see so look carefully.
Don't ever spray any lens cleaner on inside door LCD screen, The screen inside has hundreds of small holes and liquid can penetrate holes going into inner lens and drying. This will damage reel vision and can not be cleaned off.
Overall it is a very nice high tech machine but has poor quality flimsy 4 spoke reels.
Don't ever spray any lens cleaner on inside door LCD screen, The screen inside has hundreds of small holes and liquid can penetrate holes going into inner lens and drying. This will damage reel vision and can not be cleaned off.
Overall it is a very nice high tech machine but has poor quality flimsy 4 spoke reels.